Products Description
Steel studs are roll-formed, U-shaped, high-strength steel building materials mostly used with drywall. Ideal for basement, attic, and garage remodels, steel studs are embossed to create additional stiffness. Flange grooves help with drywall sheet alignment.
Main Characteristic
1.Don't Warp or Rot
Metal studs are straight and will remain straight and sturdy. They don’t warp or experience wear and tear over time. Nor are they affected by moisture or humidity.Galvanized Zinc coating will protect the channel from being rust.
2.Light Weight
Compared to wood, steel studs are lighter in weight, so easier to carry and store because they are hollow on the inside.
3.Fire & Insect Proof
Metal studs are impervious to fire as well termites and ants.
4.Cost Effective
The price of metal studs can be similar to wood. However, the price of wood is prone to fluctuation, where as the price of metal is fairly stable.
5.Size adjustability can easier to match your request
Steels studs are available in customs sizes, so there is about 2% waste versus around 20% with wood. Also, the metal scrap material is recyclable.
6. Easy and fast for installation,time-saving
Generally speaking, metal studs are easier to work with and handle; especially since they weigh less than wood. Metal studs are attached with screws, so they can be taken apart, changed or moved if need be. Metal studs also come with holes for electrical wiring; making the electrical aspect of a project easier.
7.No Dust
Cutting metal studs doesn't create a dusty mess.
Specifications
Metal Stud |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
50 | 40 | 3000 | 0.4/0.45/0.5/0.6 |
65 | 35 | 3000 | 0.4/0.45/0.5/0.6 |
70 | 35 | 3000 | 0.4/0.5/0.6 |
70 | 40 | 3000 | 0.4/0.5/0.6 |
75 | 35 | 3000 | 0.4/0.45/0.6 |
75 | 45 | 3000 | 0.4/0.5/0.6 |
100 | 50 | 3000 | 0.6/0.7/0.8/1.0 |
Metal Track |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
50 | 40 | 3000 | 0.4/0.5/0.6 |
65 | 30 | 3000 | 0.4/0.45/0.5/0.6 |
70 | 30 | 3000 | 0.4/0.45/0.5/0.6 |
70 | 35 | 3000 | 0.4/0.45/0.5/0.6 |
75 | 25 | 3000 | 0.4/0.45/0.6 |
75 | 35 | 3000 | 0.45/0.5/0.6 |
100 | 40 | 3000 | 0.4/0.5/0.6/0.8 |
Furring Channel |
A | C | Height B (mm) | Length (mm) | Thickness (mm) |
35 | 13 | 22 | 3000 | 0.4/0.5 |
Main Runner |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
38 | 12 | 3000 | 0.7/0.8/1.0/1.2 |
50 | 15 | 3000 | 0.8/1.0/1.2 |
60 | 27 | 3000 | 0.8/1.0/1.2 |
Cross Runner |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
50 | 15 | 3000 | 0.8/1.0/1.2 |
50 | 19 | 3000 | 0.4/0.45/0.5 |
60 | 27 | 3000 | 0.4/0.5/0.6 |
Suspended Bar |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
20 | 25 | 3000 | 0.6/0.7/0.8/0.9/1.0 |
20 | 28 | 3000 |
20 | 32 | 3000 |
Wall Angle |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
25 | 25 | 3000 | 0.4/0.45/0.5 |
30 | 30 | 3000 | 0.8/1.0/1.2 |
Corner Bead |
Width A (mm) | Height B (mm) | Length (mm) | Thickness (mm) |
25 | 25 | 3000 | 0.4/0.45/0.5 |